Product Overview

For 2011 to 2020 models of Ford Super Duty F250, F350, F450 and F550 trucks.
Pan includes magnetic drain plug and mounting hardware.
Price varies with finish.

Volume : approximately 3.4 quarts over stock

Dimensions: Click here for dimensions.

Number of Bolts: 19

PML designed this 6R140 pan for 2011 and newer Ford Super Duty trucks with the Power Stroke Diesel or 6.2L gas engine.

Benefits:

Cooling — extra fluid capacity and fins to aid in heat dissipation
Drain plug — on the side for safety, magnetic drain plug included
Secure seal — machined flat gasket flange for a leak free seal
Strength — heavy duty sand cast alumunim construction for thick walls
Baffles — internal baffles reduce sloshing and direct the flow of the transmission oil
Clearance — clears frame and exhaust catalytic converters

Applications:

Typical trucks that this heavy duty transmission pan may fit are:

2011 to 2016 and some newer F–250 Super Duty trucks with 6.2L gas (2017 to 2019 models: see also PML part number 11089, 6R80, 6R100 transmission pan)
2011 to 2020 F–250 Super Duty trucks with 6.7L diesel
2011 to 2020 F–350 Super Duty trucks with 6.2L gas or 6.7L diesel
2011 to 2020 F–450 Super Duty trucks with 6.2L gas or 6.7L diesel
2011 to 2020 F–550 Super Duty trucks with 6.2L gas or 6.7L diesel
Some vehicles with Ford 6.8 V10 and 6R140, such as Blue Bird school buses

Always check your vehicle to verify transmission and clearance since configurations vary.

2020 models may have a 10 speed transmission.

Filter and Gasket for PML 6R140 Transmission Pan

Click on an image to view larger.

PML design this pan to work with the stock filter. There is a filter support in the pan to hold the filter in place.

With the PML pan, the fluid level and the filter pick up are at the same place as with the stock pan. No extension is needed.

This PML pan works with the stock gasket. A cork, rubber-cork or similar gasket also works well with this PML pan.

Drain for PML 6R140 Transmission Pan

Click on image to view larger.

PML placed the drain hole on the driver/left side, near the rear of the vehicle.

The side location is safer than the bottom since there is less chance for damage than on the bottom. There is still easy access for maintenance.

A magnetic drain plug is included with the pan and all the mounting bolts.

Inside of Pan

PML put baffles and a post on the bottom to direct transmission fluid and support the filter. The baffles also reduce sloshing and act as a heat sink.

The filter support keeps the stock filter securely in place. The fluid level and the filter location are the same with the PML pan as with the stock pan so the dynamics of the transmission fluid pick up do not change.

Click on image to view larger in a separate window or tab.

Optional Machining For Temperature Sending Unit

Optionally, this pan can be machined for a temperature sending unit.

If you would like PML to drill and tap hole, there is a machining charge. A plug for the hole is included. The standard size is 1/8 NPT. Call or email if you need a different size.

PML designed four locations that optionally can be drilled and tapped for a temperature sending unit: