Product Overview

Pan includes magnetic drain plug and mounting hardware.
Price varies with finish.

Volume: 4 quarts over stock

Dimensions: Click here for dimensions.

Number of Bolts: 20

Benefits:

Extra capacity
Fins for cooling
Drain hole and magnetic drain plug
Heavy duty sand cast aluminum construction
Machined gasket surface for sealing securely to the housing
Large pan for additional filter.

The 5R110 and 5R110W may have minor internal differences but the names seem to be used interchangeably to refer to the Ford TorqShift transmission. This web page uses 5R110. This pan fits both. The stock pans are different.

Applications:

This PML transmission pan fits the Ford 5R110, 5R110W TorqShift automatic transmission from about 2008 to 2010. 2008 is a transition year when Ford updated the 5R110 and moved a filter inside the transmission pan. The stock pans are different.

PML designed this new pan to accomodate the addtional filter that Ford moved inside the pan in 2008. Many models of Ford trucks and vans with the 5R110 can used this pan. Here are some examples of vehicles that may be able to use this pan:

2008 to 2010 F250, F350, F450, F550 Super Duty trucks with 6.4 Power Stroke Diesel
2008 to 2014 E250, E350, E450 vans with 6.4 Power Stroke Diesel
2008 to 2014 E250, E350, E450 vans with V10 6.8 gas engine
2008 to 2013 motorhomes based on these platforms

Vehicle configurations vary so always check to verify transmission and space available for a larger pan.

Check your stock pan before ordering. This pan replaces the stock pan that accommodates the additional internal filter. Ford updated the transmission and transmission pan in 2008. 2008 is a transition year. The 2008 and newer models have a larger transmission pan and an additional filter is located inside the pan. The middle of the pan is about 4 1/2 inches wide. On the 2003 to 2007 stock pan, the middle is about 3 inches wide. See these pictures:

External Filter Stock Pan (2003 to 2008)
PML part number 9973 can replace this stock pan.

Ford logo is on the side
Middle of the pan is about 3 inches wide
External spin-on transmission oil filter is located near the bell housing

Internal Filter Stock Pan (2008 to 2010)
This pan, PML part number 11049, can replace this stock pan .

Ford logo is in the middle
Middle is about 4 1/2 inches wide
Larger to accommodate additional filter inside the pan

Ford vehicles with the 5.4 gas engine usually have the exhausted routed too close to the stock pan to allow for a larger transmission oil pan.

Filters Supports and Baffles

Click on image to view larger in a new tab or window.

PML designed this pan to work with the stock filter. The pan has filter supports cast into the pan.

The fluid level is at the same place with the PML pan as with the stock pan. The pick up for the transmission fluid is at the point with the PML pan as with the stock pan. A filter extension is not needed.

Baffles on the inside of the pan direct fluid to the filter pick up and aid in heat dissipation.

Gaskets

PML recommends a flexible cork or cork composite gasket for this pan, such as this:

Pictures of cork gasket and gasket on PML 5R110 pan. Click on image to view larger in new tab or window.

This cork gasket is a replacement for Ford OEM part number E9TZ-7A191-A. We ordered it from GlobalTransmissionParts.com and their part number is 3072A. This gasket will work with E4OD, 4R100 and 5R110 transmissions.

We do not recomment hard, reusable gaskets for our pans. These gaskets work best with stamped steel pans.

Optional Machining for Temperature Sending Unit

This pan can be machined for a temperature sending unit on the driver/left side. This is optional.

If you would like PML to drill and tap the hole, select the option before clicking the ADD TO CART button. There is a machining charge. A plug for the hole is included. The standard size is 1/8 NPT. Call or email if you need a different size.