Product Overview

For new Ford 10 speed transmissions in Mustangs and trucks/SUVs with skid plates. Pan includes a magnetic drain plug. Price varies with finish.

Volume: stock capacity

Dimensions: PML pan is about 5/8 inch deeper than stock due to thick walls and fins. Click here for dimensions.

Number of Bolts: 18 bolts hold the pan on the transmission case

PML designed this a stock capacity transmission pan for Ford 10R80 transmissions to maintain clearance. For example, cars such as Mustang and trucks with skidplates cannot use a deep sump transmission pan.

Benefits of PML 10R80 stock capacity transmission pan:

Drain and magnetic drain plug for easier fluid changes
Heavy duty sand cast aluminum construction (not plastic)
Finned on the whole bottom (no logo) to increase surface area for heat dissipation
Thick walls and gasket flange
PML pan fits without modification to cooling tubes or exhaust

Always check your vehicle to verify transmission and clearances.

Applications:

This is a list of vehicles that may have a 10R80 transmission and may be able to use this pan:

2020 and newer Bronco
2018 and newer Expedition
2020 and newer Explorer (may have 10R60)
2017 and newer F–150
2018 and newer Mustang
2017 and newer Ranger, 2019 and newer in US
2017 and newer Raptor
2020 and newer Police Interceptors
2020 and newer Transit Vans
2018 and newer Lincoln Navigator
2020 and newer Lincoln Aviator

Always check your vehicle before ordering. Configurations vary and PML cannot guarantee fitment.

Installation Notes

Access to the stock pan may be difficult. On some vehicles, cooling tubes, exhaust pipes, frame cross members and skid plates must be removed or loosened and lowered. Video of an installation of PML deep pan: https://youtu.be/llKEEhhZ1tg
Thin, metal heat shielding around the edges of the stock pan may need to be trimmed or removed to fit on the PML pan.
Flange does not have holes on the side for blanket that wraps around transmission (blanket may only be on 2017 models).
PML pan may not work with factory skid plates without spacers.

Drain, Optional Temperature Sensor Machining

Click on image to view larger.

PML pan has a drain hole and includes a magnetic drain plug.

Optionally, this pan can be drilled and tapped for a 1/8 NPT hole on the driver/left. Machining charges apply. Select option in the shopping cart. Other size holes may be possible, contact PML for details.

Inside of Pan

Click on image to view larger.

Included with PML Pan

PML includes a magnetic drain plug with this transmission pan.

Click on image to view larger in a new tab or window.

Stock Pan, Transmission, Filter and Dipstick

PML designed our transmission pan to work with the stock transmission, filter, gasket, dipstick and level check/fill procedure. PML allowed for the cooling lines, plates, exhaust and frame near the pan.

Ford 10R80 transmission, filter on transmission with stock transmission pan and gasket, stock transmission pan, OEM dipstick and fill hole plug:

Click on image to view larger.

On some vehicles, there is heat shielding insulation around the stock pan and undercarriage protection. There are also cooling tubes and exhaust pipes that must be moved to access the stock pan.

Ford and GM jointly developed a 10 speed transmission. Both Ford and GM will be using this transmission beginning with 2017 models. Ford calls it a 10R80 and GM calls it a 10L80. The pans are not the same.

Ford and GM are also planning beefier 10 speed transmissions, the Ford 10R140 and the GM 10L90.