Product Overview

Magnetic drain plug and mounting hardware included with PML stock capacity GM 200 4R pan.
Price varies with finish.

Volume: Stock

Dimensions: Click here for dimensions.

Number of Bolts: 16

PML designed this pan to meet the demands of high performance cars that require a lower profile than our extra capacity 200–4R deep pan.

Overall height is 3 1/8 inches. Although this pan is stock capacity, it is still larger than the stock pan. Always check your vehicle for clearance before ordering.

Benefits:

Stiff construction
Finned
Aluminum cooling
Drain hole and magnetic drain plug
Thick, machined gasket flange for a secure seal
Filter supports
Location for optional drilling and tapping for a temperature sending unit

Applications:

This PML pan fits many models of rear wheel drive cars with the GM 200–4R 4 speed automatic transmission. GM used this transmission from 1982 to 1990. Many models of these vehicles have the 200–4R:

Buick Regal T Type
Grand National
Chevrolet Monte Carlo SS

The 200–4R (or 200 R4) transmission is popular replacement transmission for high performance applications.

Alway check your vehicle to verify clearance and fitment. Configurations vary.

Inside of PML 200 4R Pan

Click on image to see a larger picture of the inside of the pan. A separate window will open and load the image.

The four rectangular areas on the bottom of the pan are the filter supports. The drain is at the top, right of the picture.

Filter Information

This PML pan works with stock filters. Example part numbers are: AC Delco TF234, Fram FT1057B, Fram FT1057C, Hastings TF60, Purolator P1194, Wix 58896

PML 200 4R transmission pans have filter supports so a filter extension is not needed.

The supports hold the filter at the same level as the stock pan. The distance from the bottom of the stock pan to the top of the flange is 2.4 to 2.6 inches. The distance from PML filter supports to the top of the flange is the same. The stock filter is about 4.8 inches tall.

This shows the inside of the stock and PML 200 4R pans:

Some customers have reported to us that a 700R4 filter may also work with our 200 4R transmission pans. PML does not have any experience with this or recommend this.

Filter information is provided for reference only. Installer should verify transmission, filter and fitment based on the individual vehicle.

Drain Location and Optional Temperature Sending Unit Machining

Click on image to view larger.

The drain is located on the driver side of the pan. A magnetic drain plug is included with each pan.

Optionally, PML can drill and tap a 1/8 NPT hole for a temperature sending unit. This would be for an aftermarket temperature gage. There is a custom machining charge.

A boss (thick area) on the passenger side of the pan is available for drilling and tapping.

Select the option before adding pan to cart. A plug for the hole is included. The standard size is 1/8 NPT. Check your aftermarket gage to verify the thread specifications for the sending unit before ordering. Call or email if you need a different size.