Product Overview

Volume: about 0.75 quarts over stock

Dimensions: Click here for dimensions.

Number of Bolts: 12 bolts

PML designed this cover for 2015 and newer Ford F-150 trucks with the new Ford 8.8 inch Super or HD; rear differential.

Some Mustangs and other Ford or Mercury vehicles may also have this new differential and be able to use this cover.

Benefits:

Bolt on replacement for stock cover
Additional 3/4 quart capacity over stock
Fins for dissipating heat
Pads for using stock clips to keep lines routed above differential in place
Drain hole and a magnetic drain plug included for easy servicing
Fill hole on side
Heavy duty sand cast aluminum construction
Hardware included
Can be drilled and tapped for a temperature sensor (optional)

Applications:

2015 and newer Ford F150

Always check your vehicle to verify your differential and clearance. Configurations vary.

Some Mustangs and other Ford or Mercury vehicles may also have this new differential and be able to use this cover.

Some F-150 trucks have the larger Ford 9.75 (9 3/4) inch ring gear rear differential, which also has 12 bolts, but a different shape.

Fill and Level Check

Level check is on the carrier. To fill, add fluid through fill hole on the side of the cover. Stop adding once fluid starts to dribble out level check hole.

Optional Machining for Temperature Sending Unit

This cover has a location for a temperature sensor on the right side of the cover. Optionally, it can be machined for a 1/8 NPT. There is a machining charge for PML to drill and tap the hole.